Bucket mould manufacturer and supplier of China!

News

Contact us

tony.yang@seacomould.com
Tel:+86-189 6961 2882
----WhatsApp&Wechat----
Knowledge

Position: Home > News > Knowledge >

How to check before acceptance of the paint bucket mould

Date:2018/12/26    Click:

With regard to the detection of bucket mould products, Seaco generally needs to do a drop test of the test barrel at a height of 1.5 meters. I would like to introduce some drop bucket test.

For the paint bucket strength test, we must consider three points:

1. Barrels and lids must be well assembled, otherwise the lids will fall apart and leak after fall;

2. The thickness of the barrel and bucket should be reasonable, and some people always want to reduce the thickness of the bucket to reduce costs. This is difficult to ensure quality, reasonable thickness can save costs while ensuring quality.

3. Material selection: This is very important, people usually use high-density polyethylene or polypropylene material barrels, but there are many kinds of each material, it is best to choose a higher hardness and cold resistance is better, heat Made of low deformation temperature material because it can provide better impact resistance.
 

How to check before acceptance of the paint bucket mould

Add: No.1 Beiyuan Rd, Beicheng, Huangyan,Taizhou,Zhejiang, China.
Copyright © 2018-2020 Seaco Mould. All rights reserved.