Bucket mould manufacturer and supplier of China!


Contact us

Tel:+86-189 6961 2882

Position: Home > News > Knowledge >

Ten key points in manufacture of paint bucket mold

Date:2018/12/15    Click:

Ten key points in manufacture of paint bucket mold
1. Design to prevent paint bucket mould eccentricity and ensure assembly and yield
2. Uniform wall thickness of the bucket for injection molding
3. The cooling water circuit ensures that cavity and core of the mold are balanced so as to prevent somewhere is overheating.
4. Design wear plate under the slider of painting pail mold to increase the life of the mold and stabilize the work.
5. Where difficult to cool, then use the copper  to provide cooling efficiency
6. Sealability. Sealing water, and double sealing effect
7. Hot runner injection molding to improve efficiency and save raw materials
8. Machining accuracy
9. Cavity and core air valve assists ejection to prevent the stick.
10. Ejection with stripper plates

Add: No.1 Beiyuan Rd, Beicheng, Huangyan,Taizhou,Zhejiang, China.
Copyright © 2018-2020 Seaco Mould. All rights reserved.